№78 Front Bumper Support Bracket for Tesla Model 3 (left)
50 RUP
Buy the model
A preview will open: you can rotate the part, choose the colour and place the order right away. The price is shown above.
| Article | TL-TSL-00057 |
|---|---|
| Manufacturer | Tesla |
| Model | Model 3 |
Эта деталь служит креплением для переднего бампера вашей Tesla Model 3 с левой стороны. Она обеспечивает необходимую структурную поддержку элемента кузова. Совместимость: Tesla Model 3 (Тесла Модель 3). Артикул TehnoLab TL-TSL-00057. Размеры: 34 × 66 × 58 мм. Перед заказом сверьте размеры с вашим образцом: посадка зависит от конкретного автомобиля и года выпуска. FDM-печать имеет технологические отклонения размеров (обычно в пределах десятых долей миллиметра). Материал: PLA или PETG (PETG — для более нагруженных и автомобильных применений).
English:
This part serves as the mounting bracket for the front bumper of your Tesla Model 3 on the left side. It provides the necessary structural support for the body element. Compatibility: Tesla Model 3. TehnoLab article TL-TSL-00057. Size: 34 × 66 × 58 mm. Please check the dimensions against your part before ordering: the fit depends on the exact car and model year. FDM printing has technological dimensional deviations (usually within a few tenths of a millimetre). Material: PLA or PETG (PETG is for more heavily loaded and automotive uses).
English:
This part serves as the mounting bracket for the front bumper of your Tesla Model 3 on the left side. It provides the necessary structural support for the body element. Compatibility: Tesla Model 3. TehnoLab article TL-TSL-00057. Size: 34 × 66 × 58 mm. Please check the dimensions against your part before ordering: the fit depends on the exact car and model year. FDM printing has technological dimensional deviations (usually within a few tenths of a millimetre). Material: PLA or PETG (PETG is for more heavily loaded and automotive uses).
Buy by phone